Lg-motorsports LG C6 Z06 Pro Long Tube Headers Bedienungsanleitung PDF herunterladen

LG Pro Long Tube Headers

2006 Corvette Z06

“THE MOST POWERFUL HEADERS ON THE PLANET”

Brought to you by LG Motorsports

972-429-1963

Thank you for purchasing LG headers for your C6 Z06 Corvette.

Parts Inventory:

1. Driver side header

2. Passenger side header

3. X- pipe with 02 sensor bungs

4. 2 high flow cats OR 2 cat delete pipes

5. Driver side rear flow tube

6. Passenger side rear flow tube

7. 8 3” stainless steel band clamps

8. 1 pair of LGM metal layer gaskets

9. 1 pair of black front 02 sensor extension wires

10. 1 pair of white rear 02 sensor extension wires

Instructions:

Removal:

Start by supporting the car on a lift, or 4 jack stands on a level surface about two

or more feet off of the ground. Disconnect negative battery cable before any work

begins. You will need to make note of the rear over the axle pipes and the spacing they

have between the frame because you will need to keep this same spacing after the

installation of the header system as to not have any rattles at the rear of the car as the

factory has placed 3” exhaust tubes here and the space is limited.

Once noting the placement of the stock exhaust parts you will need to start by

removing the old exhaust components. Start by removing the fuel rail covers on top of

the engine. These simply unclip and pull off. The driver side is a little trickier as you

need to route the fuel line through the cut out in the cover. Once that is done then set

them aside. You will also have to unbolt and remove the oil dipstick from the passenger

side of the engine.

Move on to removing the spark plug wires and spark plugs from the engine. Be

careful not to drop any of the spark plugs as this will damage the plug and cause a misfire

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - 2006 Corvette Z06

LG Pro Long Tube Headers 2006 Corvette Z06 “THE MOST POWERFUL HEADERS ON THE PLANET” Brought to you by LG Motorsports 972-429-1963 Thank you for purc

Seite 2

condition. Once this is done, the next electrical part that needs to be completed is removal of the factory 02 sensors. There are 4 sensors in the s

Seite 3

While still on the passenger side of the car there is a wiring harness that is above the starter that is clipped into the frame. This will need to b

Seite 4

Now install the header on the passenger side to start the rest of the install. The header should install from the bottom up. The driver side header

Seite 5

At this point the rest of the system can be loosely hung into place and should look like the picture in figure 5 once completed. Figure 5: Fully i

Seite 6

I thank you for choosing LG Motorsports and know that you will enjoy years of trouble free horsepower and torque from your new Corvette Z06 equippe

Kommentare zu diesen Handbüchern

Keine Kommentare

Lg-motorsports LG C6 Z06 Pro Long Tube Headers Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Lg-motorsports LG C6 Z06 Pro Long Tube Headers herunter. LG Motorsports LG C6 Z06 Pro Long Tube Headers User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Lg-motorsports LG C6 Z06 Pro Long Tube Headers